NH-YJV-1KV-3*25+2*16耐火電纜
更新時間：2024-08-21
NH-YJV-1KV-3*25+2*16耐火電纜高長期工作溫度：阻燃聚氯乙烯絕緣和護套70℃和105℃,，氟塑料絕緣和護套200℃和260℃，交聯聚乙烯絕緣90℃，低煙無鹵阻燃聚烯烴70℃，低煙無鹵阻燃交聯聚烯烴90℃和120溫度
NH-YJV-1KV-3*25+2*16耐火電纜適用范圍：
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.
NH-YJV-1KV-3*25+2*16耐火電纜使用特性：
1.工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
2·電纜導體的zui高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
3·短路時（zui長持續時間不超過5s）電纜導體zui高允許溫度
PVC:導體截面≤300mm2-160℃
導體截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
4.電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
5.電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter。
型號用途：
